1994 Toyota Celsior tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1994 Toyota Celsior.

1994 Toyota Celsior tire sizes

225/60R16 215/65R15

Bolt pattern

5x114.3

2 generations were sold in 1994. Check your chassis code before ordering wheels.

Other years

1990 1991 1992 1993 1994 1995 1996 1997 All 1989–2006

Fitment tables

4 trims sold in 1994

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Celsior II (F20)

1994 – 2000 2 trims

Celsior 4.0 (UCF20)

261 hp · V8 225/60 R16 98H 1 fitment

GenerationII (F20) 1994–2000

Power261 hp

EngineV8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/60 R16 98H	16x7 ET45 ~~5x114.3~~	–	Tires Rims

Celsior 4.0 (UCF21)

261 hp · V8 225/60 R16 98H 1 fitment

GenerationII (F20) 1994–2000

Power261 hp

EngineV8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/60 R16 98H	16x7 ET45 ~~5x114.3~~	–	Tires Rims

Toyota Celsior I (F10)

1989 – 1994 2 trims

Celsior 4.0 (UCF10)

256 hp · V8 215/65 R15 96H 2 fitments

GenerationI (F10) 1989–1994

Power256 hp

EngineV8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R15 96H	15x6.5 ET50 ~~5x114.3~~	–	Tires Rims
225/60 R16 98H	16x7 ET50 ~~5x114.3~~	–	Tires Rims

Celsior 4.0 (UCF11)

256 hp · V8 215/65 R15 96H 2 fitments

GenerationI (F10) 1989–1994

Power256 hp

EngineV8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R15 96H	15x6.5 ET50 ~~5x114.3~~	–	Tires Rims
225/60 R16 98H	16x7 ET50 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.