Skip to content

1982 Toyota Corolla tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1982 Toyota Corolla.

1982 Toyota Corolla tire sizes

Bolt pattern
Fitment tables

4 trims sold in 1982

Open a trim for its factory package and every alternative size, front and rear.

Toyota Corolla IV (E70)

1979 – 1987 4 trims

Corolla 1.3 (KE70)

68 hp · 1.3L 4K-J I4 5.00x D12 4 fitments
GenerationIV (E70) 1979–1987
Power68 hp
Engine1.3L 4K-J I4, Petrol
Center boreN/A
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
5.00x D1212x4 ET25 4x114.3TiresRims
6.00x D1212x4.5 ET25 4x114.3TiresRims
155x SR1212x4.5 ET25 4x114.3TiresRims
165/70 SR1313x5 ET20 4x114.3TiresRims

Corolla 1.3 (KE71)

68 hp · 1.3L 4K-J I4 5.00x D12 4 fitments
GenerationIV (E70) 1979–1987
Power68 hp
Engine1.3L 4K-J I4, Petrol
Center boreN/A
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
5.00x D1212x4 ET25 4x114.3TiresRims
6.00x D1212x4.5 ET25 4x114.3TiresRims
155x SR1212x4.5 ET25 4x114.3TiresRims
165/70 SR1313x5 ET20 4x114.3TiresRims

Corolla 1.5 (AE70)

76 hp · 1.5L I4 6.15x D13 4 fitments
GenerationIV (E70) 1979–1987
Power76 hp
Engine1.5L I4, Petrol
Center boreN/A
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
6.15x D1313x4.5 ET25 4x114.3TiresRims
155x SR1313x4.5 ET25 4x114.3TiresRims
175/70 HR1313x5 ET20 4x114.3TiresRims
185/60 HR1414x6 ET0 4x114.3TiresRims

Corolla 1.6 (TE73)

84 hp · 1.6L l2T-J I4 155x SR13 4 fitments
GenerationIV (E70) 1979–1987
Power84 hp
Engine1.6L l2T-J I4, Petrol
Center boreN/A
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155x SR1313x4.5 ET25 4x114.3TiresRims
175/70 HR1313x5 ET20 4x114.3TiresRims
185/70 HR1313x5 ET20 4x114.3TiresRims
185/60 HR1414x6 ET0 4x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.