Skip to content

1988 Toyota Corolla tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 Toyota Corolla.

1988 Toyota Corolla tire sizes

Bolt patterns
4x100
VI (E90)
4x114.3
V (E80)

2 generations were sold in 1988. Check your chassis code before ordering wheels.

Fitment tables

6 trims sold in 1988

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Corolla VI (E90)

1987 – 1993 5 trims

Corolla 1.3 (EE90)

72 hp · I4 155x SR13 1 fitment
GenerationVI (E90) 1987–1993
MarketJapan
Power72 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155x SR1313x5 ET45 4x100–TiresRims

Corolla 1.5 (AE91)

103 hp · I4 155x SR13 155/N 6 fitments
GenerationVI (E90) 1987–1993
MarketJapan
Power103 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155x SR13 155/N13x5 ET45 4x100–TiresRims
165x SR1313x5 ET45 4x100–TiresRims
165x R1313x5 ET39 4x100–TiresRims
175/70 R1313x5 ET39 4x100–TiresRims
175/65 R1414x5.5 ET39 4x100–TiresRims
175/65 R14 82S14x5.5 ET45 4x100–TiresRims

Corolla 1.6 (AE95)

99 hp · I4 165x SR13 1 fitment
GenerationVI (E90) 1987–1993
MarketJapan
Power99 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165x SR1313x5 ET39 4x100–TiresRims

Corolla 1.6 GT (AE92)

138 hp · I4 185/60 R14 82H 2 fitments
GenerationVI (E90) 1987–1993
MarketJapan
Power138 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R14 82H14x5.5 ET45 4x100–TiresRims
195/60 R1414x5.5 ET39 4x100–TiresRims

Corolla 1.8 D (CE90)

66 hp · I4 165x SR13 1 fitment
GenerationVI (E90) 1987–1993
MarketJapan
Power66 hp
EngineI4, Diesel
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165x SR1313x5 ET39 4x100–TiresRims

Toyota Corolla V (E80)

1983 – 1988 1 trim

Corolla All trims

N/A · N/A 155/75 R13 3 fitments
GenerationV (E80) 1983–1988
MarketUSA
PowerN/A
EngineN/A
Center boreN/A
PCD4x114.3
ThreadN/A
Tire sizeRim size and bolt patternPressure, psiPrices
155/75 R1313x5.5 ET5 4x114.3–TiresRims
175/70 R1313x6 ET5 4x114.3–TiresRims
185/60 R1414x6 ET5 4x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.