Skip to content

1991 Toyota Corona tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Toyota Corona.

1991 Toyota Corona tire sizes

Bolt patterns
4x100
IX (T170)
5x100
IX (T170)
Fitment tables

6 trims sold in 1991

Open a trim for its factory package and every alternative size, front and rear.

Toyota Corona IX (T170)

1987 – 1992 6 trims

Corona 1.5 (AT170)

84 hp · I4 165x SR13 1 fitment
GenerationIX (T170) 1987–1992
Power84 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165x SR1313x5 ET39 4x100–TiresRims

Corona 1.6i (AT175)

99 hp · I4 185/65 R14 85S 1 fitment
GenerationIX (T170) 1987–1992
Power99 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R14 85S14x6 ET45 5x100–TiresRims

Corona 1.8 (ST170)

114 hp · I4 165x R13 2 fitments
GenerationIX (T170) 1987–1992
Power114 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165x R1313x5 ET39 4x100–TiresRims
185/70 R13 85S13x5.5 ET39 4x100–TiresRims

Corona 2.0 D (CT170)

72 hp · I4 165x SR13 2 fitments
GenerationIX (T170) 1987–1992
Power72 hp
EngineI4, Diesel
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165x SR1313x5 ET39 4x100–TiresRims
185/70 R13 85S13x5.5 ET39 4x100–TiresRims

Corona 2.0i (ST171)

118 hp · I4 185/65 R14 85S 1 fitment
GenerationIX (T170) 1987–1992
Power118 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R14 85S14x6 ET45 5x100–TiresRims

Corona 2.0i GT-R (ST171)

138 hp · I4 195/60 R14 85H 1 fitment
GenerationIX (T170) 1987–1992
Power138 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R14 85H14x6 ET45 5x100–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.