Skip to content

1989 Toyota Cresta tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1989 Toyota Cresta.

1989 Toyota Cresta tire sizes

Bolt pattern
Fitment tables

8 trims sold in 1989

Open a trim for its factory package and every alternative size, front and rear.

Toyota Cresta III (X80)

1988 – 1992 8 trims

Cresta 1.8i (SX80)

103 hp · I4 175x SR14 2 fitments
GenerationIII (X80) 1988–1992
Power103 hp
EngineI4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175x SR1414x5 ET50 5x114.3TiresRims
185/70 R14 87S14x5.5 ET50 5x114.3TiresRims

Cresta 2.0i (GX81)

133 hp · I6 185/70 R14 87S 1 fitment
GenerationIII (X80) 1988–1992
Power133 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 87S14x5.5 ET50 5x114.3TiresRims

Cresta 2.0i Turbo (GX81)

168 hp · I6 195/65 R15 90H 1 fitment
GenerationIII (X80) 1988–1992
Power168 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 90H15x6 ET50 5x114.3TiresRims

Cresta 2.0i twin cam (GX81)

148 hp · I6 195/70 R14 90S 1 fitment
GenerationIII (X80) 1988–1992
Power148 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 R14 90S14x5.5 ET50 5x114.3TiresRims

Cresta 2.0i Twin Turbo (GX81)

207 hp · I6 205/55 R16 88V 1 fitment
GenerationIII (X80) 1988–1992
Power207 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 88V16x6.5 ET50 5x114.3TiresRims

Cresta 2.4 D (LX80)

84 hp · I4 175x SR14 1 fitment
GenerationIII (X80) 1988–1992
Power84 hp
EngineI4, Diesel
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175x SR1414x5 ET50 5x114.3TiresRims

Cresta 2.4 DT (LX80)

93 hp · I4 175x SR14 2 fitments
GenerationIII (X80) 1988–1992
Power93 hp
EngineI4, Diesel
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175x SR1414x5 ET50 5x114.3TiresRims
185/70 R14 87S14x5.5 ET50 5x114.3TiresRims

Cresta 3.0i (MX83)

197 hp · I6 205/60 R15 89H 1 fitment
GenerationIII (X80) 1988–1992
Power197 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 89H15x6 ET50 5x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.