2011 Toyota Crown Athlete tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Toyota Crown Athlete.

2011 Toyota Crown Athlete tire sizes

225/45R18

Bolt pattern

5x114.3

Other years

2007 2008 2009 2010 2011 2012 2013 2014 All 1999–2018

Fitment tables

4 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Toyota Crown Athlete III (S200)

2008 – 2012 4 trims

Crown Athlete 2.5 VVT-i (GRS200)

200 hp · V6 225/45 ZR18 91W 1 fitment

GenerationIII (S200) 2008–2012

Power200 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/45 ZR18 91W	18x8 ET45 ~~5x114.3~~	–	Tires Rims

Crown Athlete 2.5 VVT-i (GRS201)

200 hp · V6 225/45 ZR18 91W 1 fitment

GenerationIII (S200) 2008–2012

Power200 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/45 ZR18 91W	18x8 ET45 ~~5x114.3~~	–	Tires Rims

Crown Athlete 3.5 VVT-i (GRS204)

311 hp · V6 225/45 ZR18 91W 1 fitment

GenerationIII (S200) 2008–2012

Power311 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/45 ZR18 91W	18x8 ET45 ~~5x114.3~~	–	Tires Rims

Crown Athlete 3.5 VVT-i Turbo (GRS204)

355 hp · V6 225/45 ZR18 91W 1 fitment

GenerationIII (S200) 2008–2012

Power355 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/45 ZR18 91W	18x8 ET45 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.