1991 Toyota Crown Majesta tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Toyota Crown Majesta.

1991 Toyota Crown Majesta tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1991 – 1995 2 trims

227 hp · 3.0L 2JZ-GE I6 215/65 R15 96H 3 fitments

GenerationI (S140) 1991–1995

Power227 hp

Engine3.0L 2JZ-GE I6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R15 96H	15x7 ET50 ~~5x114.3~~	35	Tires Rims
205/65 R15 94T	15x7 ET50 ~~5x114.3~~	35	Tires Rims
215/60 R16 95H	16x7.5 ET50 ~~5x114.3~~	35	Tires Rims

256 hp · 4.0L 1UZ-FE V8 215/65 R15 96H 3 fitments

GenerationI (S140) 1991–1995

Power256 hp

Engine4.0L 1UZ-FE V8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R15 96H	15x7 ET50 ~~5x114.3~~	35	Tires Rims
205/65 R15 94T	15x7 ET50 ~~5x114.3~~	35	Tires Rims
215/60 R16 95H	16x7.5 ET50 ~~5x114.3~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.