2002 Toyota Crown Majesta tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Toyota Crown Majesta.

2002 Toyota Crown Majesta tire sizes

215/60R16 215/65R15

Bolt pattern

5x114.3

Other years

1998 1999 2000 2001 2002 2003 2004 2005 All 1991–2018

Fitment tables

4 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

Toyota Crown Majesta III (S170)

1999 – 2004 4 trims

Crown Majesta 3.0 VVT-i (JZS177)

217 hp · I6 215/65 R15 96H 2 fitments

GenerationIII (S170) 1999–2004

Power217 hp

EngineI6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R15 96H	15x6.5 ET50 ~~5x114.3~~	–	Tires Rims
215/60 R16 95H	16x6.5 ET50 ~~5x114.3~~	–	Tires Rims

Crown Majesta 4.0 VVT-i (UZS171)

276 hp · V8 215/60 R16 95H 1 fitment

GenerationIII (S170) 1999–2004

Power276 hp

EngineV8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x6.5 ET50 ~~5x114.3~~	–	Tires Rims

Crown Majesta 4.0 VVT-i (UZS173)

276 hp · V8 215/60 R16 95H 1 fitment

GenerationIII (S170) 1999–2004

Power276 hp

EngineV8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x7.5 ET50 ~~5x114.3~~	–	Tires Rims

Crown Majesta 4.0 VVT-i (UZS175)

276 hp · V8 215/60 R16 95H 1 fitment

GenerationIII (S170) 1999–2004

Power276 hp

EngineV8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x6.5 ET50 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.