2013 Toyota Crown Majesta tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Toyota Crown Majesta.

2013 Toyota Crown Majesta tire sizes

235/50R17 225/50R17 225/45R18

Bolt pattern

5x114.3

2 generations were sold in 2013. Check your chassis code before ordering wheels.

Other years

2009 2010 2011 2012 2013 2014 2015 2016 All 1991–2018

Fitment tables

3 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Crown Majesta VI (S210)

2013 – 2018 1 trim

Crown Majesta 3.5 (DAA-GWS214)

288 hp · 2GR-FXE V6 225/50 ZR17 94W 2 fitments

GenerationVI (S210) 2013–2018

Power288 hp

Engine2GR-FXE V6, Hybrid

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 ZR17 94W	17x7.5 ET40 ~~5x114.3~~	35	Tires Rims
225/45 ZR18 91W	18x8 ET40 ~~5x114.3~~	35	Tires Rims

Toyota Crown Majesta V (S200)

2009 – 2013 2 trims

Crown Majesta 4.3i (UZS207)

276 hp · V8 235/50 R17 96V 1 fitment

GenerationV (S200) 2009–2013

Power276 hp

EngineV8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/50 R17 96V	17x7.5 ET39 ~~5x114.3~~	–	Tires Rims

Crown Majesta 4.6i (URS206)

342 hp · V8 235/50 R17 96V 1 fitment

GenerationV (S200) 2009–2013

Power342 hp

EngineV8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/50 R17 96V	17x7.5 ET39 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.