2006 Toyota Crown Royal tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Toyota Crown Royal.

2006 Toyota Crown Royal tire sizes

215/60R16

Bolt pattern

5x114.3

Other years

2002 2003 2004 2005 2006 2007 2008 2009 All 1999–2018

Fitment tables

4 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear.

Toyota Crown Royal II (S180)

2003 – 2008 4 trims

Crown Royal 2.5 VVT-i (GRS180)

212 hp · V6 215/60 R16 95H 1 fitment

GenerationII (S180) 2003–2008

Power212 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x7 ET50 ~~5x114.3~~	–	Tires Rims

Crown Royal 2.5 VVT-i (GRS181)

212 hp · V6 215/60 R16 95H 1 fitment

GenerationII (S180) 2003–2008

Power212 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x7 ET50 ~~5x114.3~~	–	Tires Rims

Crown Royal 3.0 VVT-i (GRS182)

252 hp · V6 215/60 R16 95H 1 fitment

GenerationII (S180) 2003–2008

Power252 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x7 ET50 ~~5x114.3~~	–	Tires Rims

Crown Royal 3.0 VVT-i (GRS183)

252 hp · V6 215/60 R16 95H 1 fitment

GenerationII (S180) 2003–2008

Power252 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x7 ET50 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.