Skip to content

2021 Toyota Crown Vellfire tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Toyota Crown Vellfire.

2021 Toyota Crown Vellfire tire sizes

Bolt pattern
Fitment tables

1 trim sold in 2021

Open a trim for its factory package and every alternative size, front and rear.

Toyota Crown Vellfire I (H30)

2021 – 2023 1 trim

Crown Vellfire 2.5 (Van, 5d)

161 hp · 2.5 L 2AR-FXE I4 Hybrid 2.5 L 2AR-FXE I4 225/60 R17 2 fitments
GenerationI (H30) 2021–2023
MarketChina
Power161 hp
Engine2.5 L 2AR-FXE I4 Hybrid 2.5 L 2AR-FXE I4, Hybrid
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/60 R1717x6.5 ET33 5x114.335TiresRims
Alt215/65 R1616x6.5 ET33 5x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.