Skip to content

2014 Toyota Crown tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Toyota Crown.

2014 Toyota Crown tire sizes

Bolt pattern

2 generations were sold in 2014. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2014

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Crown Crown

2005 – 2008 China market 2 trims

Crown 2.0T

232 hp · 8AR-FTS I4 225/50 ZR17 94W 2 fitments
GenerationCrown 2005–2008
MarketChina
Power232 hp
Engine8AR-FTS I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 ZR17 94W17x7.5 ET40 5x114.335TiresRims
235/45 ZR18 91W18x8 ET40 5x114.335TiresRims

Crown 2.5 VVT-i

190 hp · V6 225/50 ZR17 94W 2 fitments
GenerationCrown 2005–2008
MarketChina
Power190 hp
EngineV6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 ZR17 94W17x7.5 ET40 5x114.335TiresRims
235/45 ZR18 91W18x8 ET40 5x114.335TiresRims

Toyota Crown XS10

1995 – 2017 2 trims

Crown 2.0 (DBA-TSS10)

111 hp · I4 Natural 195/65 R15 91H 1 fitment
GenerationXS10 1995–2017
MarketJapan
Power111 hp
EngineI4 Natural, Gas
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x5.5 ET45 5x114.332TiresRims

Crown 2.0 (DBA-TSS10H)

111 hp · I4 Natural 195/65 R15 91S 1 fitment
GenerationXS10 1995–2017
MarketJapan
Power111 hp
EngineI4 Natural, Gas
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91S15x5.5 ET45 5x114.332TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.