1995 Toyota Curren tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Toyota Curren.

1995 Toyota Curren tire sizes

195/65R14 205/55R15

Bolt pattern

5x100

Other years

1994 1995 1996 1997 1998 All 1994–1998

Fitment tables

4 trims sold in 1995

Open a trim for its factory package and every alternative size, front and rear.

Toyota Curren T200

1994 – 1998 4 trims

Curren 1.8i (ST208)

123 hp · I4 195/65 R14 89S 1 fitment

GenerationT200 1994–1998

Power123 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R14 89S	14x6 ET45 ~~5x100~~	–	Tires Rims

Curren 2.0i (ST206)

138 hp · I4 195/65 R14 89S 1 fitment

GenerationT200 1994–1998

Power138 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R14 89S	14x6 ET45 ~~5x100~~	–	Tires Rims

Curren 2.0i (ST207)

138 hp · I4 195/65 R14 89S 1 fitment

GenerationT200 1994–1998

Power138 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R14 89S	14x6 ET45 ~~5x100~~	–	Tires Rims

Curren 2.0i ZS (ST206)

168 hp · I4 205/55 R15 87V 1 fitment

GenerationT200 1994–1998

Power168 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/55 R15 87V	15x6.5 ET45 ~~5x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.