1998 Toyota Estima tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Toyota Estima.

1998 Toyota Estima tire sizes

215/65R15

Bolt pattern

5x114.3

Other years

1994 1995 1996 1997 1998 1999 2000 2001 All 1990–2019

Fitment tables

4 trims sold in 1998

Open a trim for its factory package and every alternative size, front and rear.

Toyota Estima I

1990 – 1999 4 trims

Estima 2.4i Turbo (TCR10W)

158 hp · I4 215/65 R15 96H 1 fitment

GenerationI 1990–1999

Power158 hp

EngineI4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R15 96H	15x6 ET50 ~~5x114.3~~	–	Tires Rims

Estima 2.4i Turbo (TCR11W)

158 hp · I4 215/65 R15 96H 1 fitment

GenerationI 1990–1999

Power158 hp

EngineI4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R15 96H	15x6 ET50 ~~5x114.3~~	–	Tires Rims

Estima 2.4i Turbo (TCR20W)

158 hp · I4 215/65 R15 96H 1 fitment

GenerationI 1990–1999

Power158 hp

EngineI4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R15 96H	15x6 ET50 ~~5x114.3~~	–	Tires Rims

Estima 2.4i Turbo (TCR21W)

158 hp · I4 215/65 R15 96H 1 fitment

GenerationI 1990–1999

Power158 hp

EngineI4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/65 R15 96H	15x6 ET50 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.