2013 Toyota Etios Valco tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Toyota Etios Valco.

2013 Toyota Etios Valco tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2011 – 2017 Southeast Asia market 1 trim

79 hp · 3NR-FE I4 175/65 R14 82S 4 fitments

GenerationAK10 2011–2017

Power79 hp

Engine3NR-FE I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R14 82S	14x5 ET45 ~~4x100~~	32	Tires Rims
185/60 R15 84H	15x5.5 ET45 ~~4x100~~	32	Tires Rims
185/55 R16 83H	16x5.5 ET45 ~~4x100~~	32	Tires Rims
185/50 R16 81H	16x6 ET40 ~~4x100~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.