2020 Toyota Granvia tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Toyota Granvia.

2020 Toyota Granvia tire sizes

235/60R17 235/55R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2019 – 2027 Australia market 3 trims

174 hp · 2.8L 1GD-FTV I4 235/60 R17 109T 2 fitments

GenerationH33 2019–2027

MarketAustralia

Power174 hp

Engine2.8L 1GD-FTV I4, Diesel

Center bore75 mm

PCD6x130

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/60 R17 109T	17x7 ET55 ~~6x130~~	3.5	Tires Rims
235/55 R18 104T	18x7.5 ET50 ~~6x130~~	3.2	Tires Rims

154 hp · 2.8L 1GD-FTV I4 235/60 R17 109T 2 fitments

GenerationH33 2019–2027

MarketMiddle East

Power154 hp

Engine2.8L 1GD-FTV I4, Diesel

Center bore75 mm

PCD6x130

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/60 R17 109T	17x7 ET55 ~~6x130~~	3.5	Tires Rims
235/55 R18 104T	18x7.5 ET50 ~~6x130~~	3.2	Tires Rims

277 hp · 3.5L I4 235/60 R17 109T 2 fitments

GenerationH33 2019–2027

MarketMiddle East

Power277 hp

Engine3.5L I4, Diesel

Center bore75 mm

PCD6x130

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/60 R17 109T	17x7 ET55 ~~6x130~~	3.5	Tires Rims
235/55 R18 104T	18x7.5 ET50 ~~6x130~~	3.2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.