Skip to content

2024 Toyota Hilux Rangga tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Toyota Hilux Rangga.

2024 Toyota Hilux Rangga tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

Toyota Hilux Rangga Hilux Rangga

2024 – 2027 2 trims

Hilux Rangga 2.0 VVT-i

137 hp · 2.0 L 1TR-FE I4 Petrol 2.0 L 1TR-FE I4 215/65 R16 / 215/65 R16 1 fitment
GenerationHilux Rangga 2024–2027
MarketSoutheast Asia
Power137 hp
Engine2.0 L 1TR-FE I4 Petrol 2.0 L 1TR-FE I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront215/65 R1616x 5x114.3–TiresRims
Rear215/65 R16 5x114.3–Tires

Hilux Rangga 2.4 D

148 hp · 2.4 L 2GD-FTV I4 Diesel 2.4 L 2GD-FTV I4 215/65 R16 / 215/65 R16 1 fitment
GenerationHilux Rangga 2024–2027
MarketSoutheast Asia
Power148 hp
Engine2.4 L 2GD-FTV I4 Diesel 2.4 L 2GD-FTV I4, Diesel
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront215/65 R1616x 5x114.3–TiresRims
Rear215/65 R16 5x114.3–Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.