Skip to content

2009 Toyota iQ tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Toyota iQ.

2009 Toyota iQ tire sizes

Bolt pattern
Fitment tables

5 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Toyota iQ iQ

2008 – 2016 5 trims

iQ 1.0 VVT-i

67 hp · I3 175/65 R15 84S 2 fitments
GenerationiQ 2008–2016
MarketEurope
Power67 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R15 84S15x5 ET45 4x1002.3TiresRims
175/60 R16 82H16x5 ET45 4x1002.2TiresRims

iQ 1.0 VVT-i (KGJ10)

67 hp · I3 175/65 R15 1 fitment
GenerationiQ 2008–2016
MarketJapan
Power67 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R1515x5 ET45 4x100–TiresRims

iQ 1.3 VVT-i (NGJ10)

93 hp · I4 175/65 R15 2 fitments
GenerationiQ 2008–2016
MarketJapan
Power93 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R1515x5 ET45 4x100–TiresRims
175/60 R1616x5 ET45 4x100–TiresRims

iQ 1.33 VVT-i

97 hp · 1.33L 1NR-FE I4 175/65 R15 84S 2 fitments
GenerationiQ 2008–2016
MarketEurope
Power97 hp
Engine1.33L 1NR-FE I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R15 84S15x5 ET45 4x1002.3TiresRims
175/60 R16 82H16x5 ET45 4x1002.2TiresRims

iQ 1.4 D-4D

89 hp · I4 175/65 R15 84S 2 fitments
GenerationiQ 2008–2016
MarketEurope
Power89 hp
EngineI4, Diesel
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R15 84S15x5 ET45 4x1002.3TiresRims
175/60 R16 82H16x5 ET45 4x1002.2TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.