Skip to content

2004 Toyota Mark II tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Toyota Mark II.

2004 Toyota Mark II tire sizes

Bolt pattern
Fitment tables

5 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear.

Toyota Mark II IX (X110) Facelift

2002 – 2004 5 trims

Mark II 2.0 VVT-i (GX110)

158 hp · I6 195/65 R15 91H 3 fitments
GenerationIX (X110) Facelift 2002–2004
Power158 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x6.5 ET50 5x114.3TiresRims
205/55 R16 89V16x6.5 ET50 5x114.3TiresRims
215/45 ZR1717x7 ET50 5x114.3TiresRims

Mark II 2.0 VVT-i (GX115)

158 hp · I6 195/65 R15 91H 1 fitment
GenerationIX (X110) Facelift 2002–2004
Power158 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x6.5 ET50 5x114.3TiresRims

Mark II 2.5 VVT-i (JZX110)

197 hp · I6 195/65 R15 91H 3 fitments
GenerationIX (X110) Facelift 2002–2004
Power197 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x6.5 ET50 5x114.3TiresRims
205/55 R16 89V16x6.5 ET50 5x114.3TiresRims
215/45 ZR1717x7 ET50 5x114.3TiresRims

Mark II 2.5 VVT-i (JZX115)

193 hp · I6 195/65 R15 91H 1 fitment
GenerationIX (X110) Facelift 2002–2004
Power193 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91H15x6.5 ET50 5x114.3TiresRims

Mark II 2.5 VVT-i Turbo (JZX110)

276 hp · I6 215/45 ZR17 1 fitment
GenerationIX (X110) Facelift 2002–2004
Power276 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/45 ZR1717x7.5 ET50 5x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.