2006 Toyota Mark X tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Toyota Mark X.

2006 Toyota Mark X tire sizes

215/60R16 225/45R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2004 – 2009 3 trims

212 hp · V6 215/60 R16 95H 2 fitments

GenerationI 2004–2009

Power212 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x7 ET50 ~~5x114.3~~	–	Tires Rims
225/45 ZR18 91W	18x8 ET50 ~~5x114.3~~	–	Tires Rims

212 hp · V6 215/60 R16 95H 2 fitments

GenerationI 2004–2009

Power212 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x7 ET50 ~~5x114.3~~	–	Tires Rims
225/45 ZR18 91W	18x8 ET50 ~~5x114.3~~	–	Tires Rims

252 hp · V6 215/60 R16 95H 2 fitments

GenerationI 2004–2009

Power252 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x7 ET50 ~~5x114.3~~	–	Tires Rims
225/45 ZR18 91W	18x8 ET50 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.