2013 Toyota Mark X tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Toyota Mark X.

2013 Toyota Mark X tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2012 – 2016 3 trims

200 hp · V6 215/60 R16 95H 2 fitments

GenerationII Facelift 2012–2016

Power200 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x7 ET40 ~~5x114.3~~	36	Tires Rims
235/40 ZR19 92Y	19x8 ET40 ~~5x114.3~~	35	Tires Rims

200 hp · V6 215/60 R16 95H 1 fitment

GenerationII Facelift 2012–2016

Power200 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x7 ET40 ~~5x114.3~~	36	Tires Rims

314 hp · V6 235/45 ZR18 94W 2 fitments

GenerationII Facelift 2012–2016

Power314 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/45 ZR18 94W	18x8 ET45 ~~5x114.3~~	35	Tires Rims
235/40 ZR19 92Y	19x8 ET50 ~~5x114.3~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.