2020 Toyota Mirai tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Toyota Mirai.

2020 Toyota Mirai tire sizes

215/55R17 235/45R18 235/55R19 245/45R20

Bolt patterns

5x120

5x114.3

2 generations were sold in 2020. Check your chassis code before ordering wheels.

Other years

2016 2017 2018 2019 2020 2021 2022 2023 All 2014–2026

Fitment tables

3 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Mirai II

2020 – 2027 1 trim

Mirai FCV (ZBA-JPD20)

180 hp · 3KM 235/55 R19 101V 2 fitments

GenerationII 2020–2027

MarketJapan

Power180 hp

Engine3KM, Hydrogen

Center bore60.1 mm

PCD5x120

ThreadN/A

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/55 R19 101V	19x8 ET35 ~~5x120~~	33	Tires Rims
245/45 ZR20 103Y	20x8.5 ET35 ~~5x120~~	33	Tires Rims

Toyota Mirai I

2014 – 2021 2 trims

Mirai FCHV

152 hp · 4JM 215/55 R17 93V 2 fitments

GenerationI 2014–2021

MarketUSA

Power152 hp

Engine4JM, Hydrogen

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/55 R17 93V	17x7 ET39 ~~5x114.3~~	36	Tires Rims
235/45 ZR18 94W	18x7.5 ET45 ~~5x114.3~~	36	Tires Rims

Mirai FCHV (ZBA-JPD10)

152 hp · 4JM 215/55 ZR17 94W 2 fitments

GenerationI 2014–2021

MarketJapan

Power152 hp

Engine4JM, Hydrogen

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/55 ZR17 94W	17x7 ET39 ~~5x114.3~~	33	Tires Rims
235/45 ZR18 94W	18x7.5 ET45 ~~5x114.3~~	36	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.