2006 Toyota MR2 Spyder tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Toyota MR2 Spyder.

2006 Toyota MR2 Spyder tire sizes

185/55R15 215/45R16

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2003 – 2006 USA market 1 trim

138 hp · 1.8L 1ZZ-FE I4 185/55 R15 81V / 215/45 R16 86V 1 fitment

GenerationIII Facelift 2003–2006

Power138 hp

Engine1.8L 1ZZ-FE I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front185/55 R15 81V	15x6 ET45 ~~4x100~~	30	Tires Rims
Rear215/45 R16 86V	16x7 ET45 ~~4x100~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.