2004 Toyota Noah tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2004 Toyota Noah.

2004 Toyota Noah tire sizes

195/65R15

Bolt pattern

5x114.3

2 generations were sold in 2004. Check your chassis code before ordering wheels.

Other years

2001 2002 2003 2004 2005 2006 2007 2008 All 2001–2026

Fitment tables

4 trims sold in 2004

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Noah I Facelift

2004 – 2007 Japan market 2 trims

Noah 2.0i (AZR60G)

153 hp · I4 195/65 R15 1 fitment

GenerationI Facelift 2004–2007

Power153 hp

EngineI4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15	15x6 ET50 ~~5x114.3~~	–	Tires Rims

Noah 2.0i (AZR65G)

153 hp · I4 195/65 R15 1 fitment

GenerationI Facelift 2004–2007

Power153 hp

EngineI4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15	15x6 ET50 ~~5x114.3~~	–	Tires Rims

Toyota Noah I

2001 – 2004 Japan market 2 trims

Noah 2.0i (AZR60G)

150 hp · I4 195/65 R15 1 fitment

GenerationI 2001–2004

Power150 hp

EngineI4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15	15x6 ET50 ~~5x114.3~~	–	Tires Rims

Noah 2.0i (AZR65G)

150 hp · I4 195/65 R15 1 fitment

GenerationI 2001–2004

Power150 hp

EngineI4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15	15x6 ET50 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.