2000 Toyota Opa tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Toyota Opa.

2000 Toyota Opa tire sizes

195/65R15 185/70R14

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2000 – 2005 3 trims

134 hp · I4 185/70 R14 88S 2 fitments

GenerationOpa 2000–2005

Power134 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 88S	14x6 ET45 ~~5x100~~	–	Tires Rims
195/65 R15 91S	15x6 ET45 ~~5x100~~	–	Tires Rims

123 hp · I4 195/65 R15 91S 1 fitment

GenerationOpa 2000–2005

Power123 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91S	15x6 ET45 ~~5x100~~	–	Tires Rims

150 hp · I4 185/70 R14 88S 2 fitments

GenerationOpa 2000–2005

Power150 hp

EngineI4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 88S	14x6 ET45 ~~5x100~~	–	Tires Rims
195/65 R15 91S	15x6 ET45 ~~5x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.