Skip to content

2018 Toyota Passo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2018 Toyota Passo.

2018 Toyota Passo tire sizes

Bolt pattern

2 generations were sold in 2018. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2018

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Passo III Facelift

2018 – 2023 Japan market 2 trims

Passo 1.0i (5BA-M700A)

68 hp · 1KR-FE I3 165/65 R14 79S 2 fitments
GenerationIII Facelift 2018–2023
Power68 hp
Engine1KR-FE I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/65 R14 79S14x5 ET35 4x10036TiresRims
175/55 R15 77V15x5 ET40 4x10036TiresRims

Passo 1.0i (5BA-M710A)

68 hp · 1KR-FE I3 165/65 R14 79S 2 fitments
GenerationIII Facelift 2018–2023
Power68 hp
Engine1KR-FE I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/65 R14 79S14x5 ET35 4x10036TiresRims
175/55 R15 77V15x5 ET40 4x10036TiresRims

Toyota Passo III

2016 – 2018 Japan market 2 trims

Passo 1.0i (DBA-M700A)

68 hp · 1KR-FE I3 165/65 R14 79S 2 fitments
GenerationIII 2016–2018
Power68 hp
Engine1KR-FE I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/65 R14 79S14x5 ET35 4x10036TiresRims
175/55 R15 77V15x5 ET40 4x10036TiresRims

Passo 1.0i (DBA-M710A)

68 hp · 1KR-FE I3 165/65 R14 79S 2 fitments
GenerationIII 2016–2018
Power68 hp
Engine1KR-FE I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/65 R14 79S14x5 ET35 4x10036TiresRims
175/55 R15 77V15x5 ET40 4x10036TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.