Skip to content

2001 Toyota Picnic tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Toyota Picnic.

2001 Toyota Picnic tire sizes

Bolt pattern

2 generations were sold in 2001. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Picnic XM20

2001 – 2003 1 trim

Picnic 2.0 VVT-i

148 hp · 1AZ-FE I4 205/65 R15 94H 3 fitments
GenerationXM20 2001–2003
MarketSoutheast Asia
Power148 hp
Engine1AZ-FE I4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 94H15x6 ET45 5x114.333TiresRims
205/65 R15 94H15x6.5 ET39 5x114.333TiresRims
205/60 R16 92H16x6 ET39 5x114.333TiresRims

Toyota Picnic XM10

1996 – 2001 3 trims

Picnic 2.0i

126 hp · I4 195/65 R14 89T 3 fitments
GenerationXM10 1996–2001
MarketEurope
Power126 hp
EngineI4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R14 89T14x6 ET45 5x114.333TiresRims
185/70 R1414x6 ET45 5x114.333TiresRims
195/60 R1515x6 ET45 5x114.333TiresRims

Picnic 2.0i

121 hp · I4 195/65 R14 89T 3 fitments
GenerationXM10 1996–2001
MarketEurope
Power121 hp
EngineI4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R14 89T14x6 ET45 5x114.333TiresRims
185/70 R1414x6 ET45 5x114.333TiresRims
195/60 R1515x6 ET45 5x114.333TiresRims

Picnic 2.2 D

89 hp · I4 195/65 R14 89T 3 fitments
GenerationXM10 1996–2001
MarketEurope
Power89 hp
EngineI4, Diesel
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R14 89T14x6 ET45 5x114.333TiresRims
185/70 R1414x6 ET45 5x114.333TiresRims
195/60 R1515x6 ET45 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.