Skip to content

2026 Toyota Pixis Epoch tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Toyota Pixis Epoch.

2026 Toyota Pixis Epoch tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Toyota Pixis Epoch II (LA350)

2017 – 2027 2 trims

Pixis Epoch 0.66i 5BA-LA350A (Hatchback, 5d (LA350))

48 hp · 0.7 L KF-VE I3 Petrol 0.7 L KF-VE I3 155/70 R13 / 155/70 R13 3 fitments
GenerationII (LA350) 2017–2027
MarketJapan
Power48 hp
Engine0.7 L KF-VE I3 Petrol 0.7 L KF-VE I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront155/70 R1313x 4x10038TiresRims
Rear155/70 R13 4x10038Tires
OE155/65 R1414x4.5 ET45 4x10038TiresRims
Alt165/55 R1515x4.5 ET45 4x10038TiresRims

Pixis Epoch 0.66i 5BA-LA360A (Hatchback, 5d (LA350))

48 hp · 0.7 L KF-VE I3 Petrol 0.7 L KF-VE I3 155/70 R13 / 155/70 R13 3 fitments
GenerationII (LA350) 2017–2027
MarketJapan
Power48 hp
Engine0.7 L KF-VE I3 Petrol 0.7 L KF-VE I3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront155/70 R1313x 4x10038TiresRims
Rear155/70 R13 4x10038Tires
OE155/65 R1414x4.5 ET45 4x10038TiresRims
Alt165/55 R1515x4.5 ET45 4x10038TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.