Skip to content

2000 Toyota Previa tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Toyota Previa.

2000 Toyota Previa tire sizes

Bolt pattern

2 generations were sold in 2000. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2000

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Previa II (XR30, XR40)

2000 – 2006 1 trim

Previa 2.4

154 hp · I4 205/60 R15 94H 3 fitments
GenerationII (XR30, XR40) 2000–2006
Power154 hp
EngineI4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 94H15x6 ET50 5x114.333TiresRims
215/55 R16 95H16x6 ET50 5x114.333TiresRims
215/50 R17 94H17x6.5 ET50 5x114.333TiresRims

Toyota Previa I (XR10, XR20)

1990 – 2000 1 trim

Previa 2.4

130 hp · I4 215/65 R15 95H 2 fitments
GenerationI (XR10, XR20) 1990–2000
Power130 hp
EngineI4, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R15 95H15x6 ET50 5x114.333TiresRims
225/55 R16 94H16x7 ET50 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.