2000 Toyota Prius tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Toyota Prius.

2000 Toyota Prius tire sizes

175/65R14 165/65R15 155/80R13

Bolt pattern

4x100

2 generations were sold in 2000. Check your chassis code before ordering wheels.

Other years

1997 1998 1999 2000 2001 2002 2003 2004 All 1997–2026

Fitment tables

3 trims sold in 2000

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Prius I Facelift (XW10)

2000 – 2004 2 trims

Prius 1.5

71 hp · I4 155/80 R13 79S 2 fitments

GenerationI Facelift (XW10) 2000–2004

MarketEurope

Power71 hp

EngineI4, Hybrid

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/80 R13 79S	13x5 ET39 ~~4x100~~	2.3	Tires Rims
175/65 R14 82T	14x5.5 ET45 ~~4x100~~	2.3	Tires Rims

Prius 1.5 (NHW11)

71 hp · I4 175/65 R14 2 fitments

GenerationI Facelift (XW10) 2000–2004

MarketJapan

Power71 hp

EngineI4, Hybrid

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R14	14x5.5 ET45 ~~4x100~~	–	Tires Rims
165/65 R15 81S	15x5 ET45 ~~4x100~~	–	Tires Rims

Toyota Prius I (XW10)

1997 – 2001 1 trim

Prius 1.5 (NHW10)

58 hp · I4 165/65 R15 1 fitment

GenerationI (XW10) 1997–2001

MarketJapan

Power58 hp

EngineI4, Hybrid

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/65 R15	15x5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.