Skip to content

2025 Toyota Proace Verso tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Toyota Proace Verso.

2025 Toyota Proace Verso tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear.

Toyota Proace Verso Facelift

2024 – 2027 3 trims

Proace Verso 2.0 D-4D (Van)

142 hp · 2.0 L 4WZ-FHV I4 Diesel 2.0 L 4WZ-FHV I4 215/65 R16 3 fitments
GenerationFacelift 2024–2027
MarketEurope
Power142 hp
Engine2.0 L 4WZ-FHV I4 Diesel 2.0 L 4WZ-FHV I4, Diesel
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/65 R1616x7 ET46 5x10842 F / 45 RTiresRims
Alt215/60 R1717x7 ET46 5x10842 F / 45 RTiresRims
Alt225/55 R1717x7 ET46 5x108–TiresRims

Proace Verso 2.2 D (Van)

148 hp · 2.2 L I4 Diesel 2.2 L I4 215/65 R16 3 fitments
GenerationFacelift 2024–2027
MarketEurope
Power148 hp
Engine2.2 L I4 Diesel 2.2 L I4, Diesel
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/65 R1616x7 ET46 5x10842 F / 45 RTiresRims
Alt215/60 R1717x7 ET46 5x10842 F / 45 RTiresRims
Alt225/55 R1717x7 ET46 5x108–TiresRims

Proace Verso EV (Van)

134 hp · ZK01 Electric ZK01 215/65 R16 3 fitments
GenerationFacelift 2024–2027
MarketEurope
Power134 hp
EngineZK01 Electric ZK01, Electric
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE215/65 R1616x7 ET46 5x10842 F / 45 RTiresRims
Alt215/60 R1717x7 ET46 5x10842 F / 45 RTiresRims
Alt225/55 R1717x7 ET46 5x108–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.