2003 Toyota Raum tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Toyota Raum.

2003 Toyota Raum tire sizes

175/65R14 185/55R15

Bolt pattern

4x100

2 generations were sold in 2003. Check your chassis code before ordering wheels.

Other years

1999 2000 2001 2002 2003 2004 2005 2006 All 1997–2011

Fitment tables

3 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Raum II

2003 – 2011 2 trims

Raum 1.5i (NCZ20)

107 hp · I4 175/65 R14 82S 2 fitments

GenerationII 2003–2011

Power107 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R14 82S	14x5.5 ET39 ~~4x100~~	–	Tires Rims
185/55 R15 81V	15x5.5 ET39 ~~4x100~~	–	Tires Rims

Raum 1.5i (NCZ25)

103 hp · I4 175/65 R14 82S 1 fitment

GenerationII 2003–2011

Power103 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R14 82S	14x5.5 ET39 ~~4x100~~	–	Tires Rims

Toyota Raum I

1997 – 2003 1 trim

Raum 1.5i (EXZ10)

90 hp · I4 175/65 R14 82S 1 fitment

GenerationI 1997–2003

Power90 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R14 82S	14x5.5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.