2000 Toyota Regius tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Toyota Regius.

2000 Toyota Regius tire sizes

205/70R15 215/65R15 215/70R15

Bolt pattern

6x139.7

Other years

1999 2000 2001 2002 All 1999–2002

Fitment tables

4 trims sold in 2000

Open a trim for its factory package and every alternative size, front and rear.

Toyota Regius Regius

1999 – 2002 4 trims

Regius 2.7i (RCH41W)

143 hp · I4 205/70 R15 95H 2 fitments

GenerationRegius 1999–2002

Power143 hp

EngineI4, Petrol

Center bore67.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 R15 95H	15x6 ET29 ~~6x139.7~~	–	Tires Rims
215/65 R15 96H	15x6 ET29 ~~6x139.7~~	–	Tires Rims

Regius 2.7i (RCH47W)

143 hp · I4 215/70 R15 98S 1 fitment

GenerationRegius 1999–2002

Power143 hp

EngineI4, Petrol

Center bore106.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/70 R15 98S	15x6 ET30 ~~6x139.7~~	–	Tires Rims

Regius 3.0DT (KCH40W)

138 hp · I4 205/70 R15 95H 2 fitments

GenerationRegius 1999–2002

Power138 hp

EngineI4, Diesel

Center bore67.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 R15 95H	15x6 ET29 ~~6x139.7~~	–	Tires Rims
215/65 R15 96H	15x6 ET29 ~~6x139.7~~	–	Tires Rims

Regius 3.0DT (KCH46W)

138 hp · I4 215/70 R15 98S 1 fitment

GenerationRegius 1999–2002

Power138 hp

EngineI4, Diesel

Center bore106.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/70 R15 98S	15x6 ET30 ~~6x139.7~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.