Skip to content

2018 Toyota Rush tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2018 Toyota Rush.

2018 Toyota Rush tire sizes

Bolt pattern

2 generations were sold in 2018. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2018

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Rush F800

2018 – 2027 3 trims

Rush 1.5 VVT-i

103 hp · 1.5L 2NR-VE I4 215/65 R16 2 fitments
GenerationF800 2018–2027
MarketSoutheast Asia
Power103 hp
Engine1.5L 2NR-VE I4, Petrol
Center bore66.5 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R1616x6.5 ET50 5x114.32.6TiresRims
215/60 R1717x6.5 ET50 5x114.32.6TiresRims

Rush 1.5 VVT-i

102 hp · 1.5L 2NR-VE I4 215/65 R16 2 fitments
GenerationF800 2018–2027
MarketLatin America
Power102 hp
Engine1.5L 2NR-VE I4, Petrol
Center bore66.5 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R1616x6.5 ET50 5x114.3TiresRims
215/60 R1717x6.5 ET50 5x114.3TiresRims

Rush 1.5 VVT-i

103 hp · 1.5L 2NR-VE I4 215/60 R17 2 fitments
GenerationF800 2018–2027
MarketMiddle East
Power103 hp
Engine1.5L 2NR-VE I4, Petrol
Center bore66.5 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R1717x6.5 ET50 5x114.3TiresRims
235/55 R1717x7 ET45 5x114.3TiresRims

Toyota Rush J200/F700

2006 – 2018 1 trim

Rush 1.5 VVT-i

107 hp · 3SZ-VE I4 215/65 R16 98S 2 fitments
GenerationJ200/F700 2006–2018
MarketLatin America
Power107 hp
Engine3SZ-VE I4, Petrol
Center bore66.5 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/65 R16 98S16x6 ET50 5x114.332TiresRims
215/60 R17 96H17x6.5 ET50 5x114.332TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.