2006 Toyota Sequoia tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Toyota Sequoia.

2006 Toyota Sequoia tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2000 – 2007 USA market 1 trim

274 hp · V8 245/70 R16 106S 3 fitments

GenerationI (XK30/XK40) 2000–2007

Power274 hp

EngineV8, Petrol

Center bore106.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/70 R16 106S	16x7 ET15 ~~6x139.7~~	2.4	Tires Rims
265/70 R16 111S	16x7 ET15 ~~6x139.7~~	32	Tires Rims
265/65 R17 110S	17x7.5 ET15 ~~6x139.7~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.