2002 Toyota Sienna tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Toyota Sienna.

2002 Toyota Sienna tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1997 – 2003 USA market 1 trim

211 hp · 1MZ-FE V6 205/70 R15 95S 3 fitments

GenerationI (XL10) 1997–2003

Power211 hp

Engine1MZ-FE V6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 R15 95S	15x6.5 ET38 ~~5x114.3~~	35	Tires Rims
215/65 R15 95S	15x6.5 ET38 ~~5x114.3~~	32	Tires Rims
225/60 R16 98H	16x7 ET40 ~~5x114.3~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.