2018 Toyota Sienna tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2018 Toyota Sienna.

2018 Toyota Sienna tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2018 – 2020 USA market 1 trim

296 hp · 2GR-FKS V6 235/60 R17 100T 4 fitments

GenerationIII (XL30) Facelift 2018–2020

Power296 hp

Engine2GR-FKS V6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/60 R17 100T	17x7 ET35 ~~5x114.3~~	35	Tires Rims
235/55 R18 100V	18x7 ET35 ~~5x114.3~~	36	Tires Rims
235/55 R18 100T	18x7 ET35 ~~5x114.3~~	36	Tires Rims
235/50 R19 99V	19x7 ET35 ~~5x114.3~~	36	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.