1988 Toyota Soarer tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 Toyota Soarer.

1988 Toyota Soarer tire sizes

215/60R15 205/60R15

Bolt pattern

5x114.3

Other years

1986 1987 1988 1989 1990 1991 1992 1993 All 1986–2005

Fitment tables

4 trims sold in 1988

Open a trim for its factory package and every alternative size, front and rear.

Toyota Soarer II (Z20)

1986 – 1991 4 trims

Soarer 2.0 GT (GZ20)

148 hp · I6 205/60 R15 89H 1 fitment

GenerationII (Z20) 1986–1991

Power148 hp

EngineI6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R15 89H	15x6 ET50 ~~5x114.3~~	–	Tires Rims

Soarer 2.0 GT Twin Turbo (GZ20)

207 hp · I6 215/60 R15 90H 1 fitment

GenerationII (Z20) 1986–1991

Power207 hp

EngineI6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R15 90H	15x6 ET50 ~~5x114.3~~	–	Tires Rims

Soarer 3.0 Turbo (MZ20)

237 hp · I6 215/60 R15 90H 1 fitment

GenerationII (Z20) 1986–1991

Power237 hp

EngineI6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R15 90H	15x6 ET50 ~~5x114.3~~	–	Tires Rims

Soarer 3.0 Turbo (MZ21)

237 hp · I6 215/60 R15 90H 1 fitment

GenerationII (Z20) 1986–1991

Power237 hp

EngineI6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R15 90H	15x6 ET50 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.