1996 Toyota Soarer tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Toyota Soarer.

1996 Toyota Soarer tire sizes

225/55R16 215/60R15

Bolt pattern

5x114.3

Other years

1992 1993 1994 1995 1996 1997 1998 1999 All 1986–2005

Fitment tables

4 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear.

Toyota Soarer III (Z30)

1991 – 2001 4 trims

Soarer 2.5 Turbo (JZZ30)

276 hp · I6 225/55 R16 93V 1 fitment

GenerationIII (Z30) 1991–2001

Power276 hp

EngineI6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/55 R16 93V	16x7 ET50 ~~5x114.3~~	–	Tires Rims

Soarer 3.0 (JZZ31)

221 hp · I6 215/60 R15 94H 2 fitments

GenerationIII (Z30) 1991–2001

Power221 hp

EngineI6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R15 94H	15x6.5 ET50 ~~5x114.3~~	–	Tires Rims
225/55 R16 94V	16x7 ET50 ~~5x114.3~~	–	Tires Rims

Soarer 4.0 (UZZ31)

261 hp · V8 215/60 R15 94H 1 fitment

GenerationIII (Z30) 1991–2001

Power261 hp

EngineV8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R15 94H	15x6.5 ET50 ~~5x114.3~~	–	Tires Rims

Soarer 4.0 (UZZ32)

261 hp · V8 225/55 R16 94V 1 fitment

GenerationIII (Z30) 1991–2001

Power261 hp

EngineV8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/55 R16 94V	16x7 ET50 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.