2001 Toyota Soarer tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Toyota Soarer.

2001 Toyota Soarer tire sizes

225/55R16 215/60R15 245/40R18

Bolt pattern

5x114.3

2 generations were sold in 2001. Check your chassis code before ordering wheels.

Other years

1997 1998 1999 2000 2001 2002 2003 2004 All 1986–2005

Fitment tables

4 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Soarer IV (Z40)

2001 – 2005 1 trim

Soarer 4.3 VVT-i (UZZ40)

276 hp · V8 245/40 ZR18 1 fitment

GenerationIV (Z40) 2001–2005

Power276 hp

EngineV8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/40 ZR18	18x8 ET45 ~~5x114.3~~	–	Tires Rims

Toyota Soarer III (Z30)

1991 – 2001 3 trims

Soarer 2.5 Turbo (JZZ30)

276 hp · I6 225/55 R16 93V 1 fitment

GenerationIII (Z30) 1991–2001

Power276 hp

EngineI6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/55 R16 93V	16x7 ET50 ~~5x114.3~~	–	Tires Rims

Soarer 3.0 (JZZ31)

227 hp · I6 225/55 R16 94V 1 fitment

GenerationIII (Z30) 1991–2001

Power227 hp

EngineI6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/55 R16 94V	16x7 ET50 ~~5x114.3~~	–	Tires Rims

Soarer 4.0 (UZZ31)

261 hp · V8 215/60 R15 94H 1 fitment

GenerationIII (Z30) 1991–2001

Power261 hp

EngineV8, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R15 94H	15x6.5 ET50 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.