1995 Toyota Sprinter Carib tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Toyota Sprinter Carib.

1995 Toyota Sprinter Carib tire sizes

185/65R14 185/65R13 185/70R13

Bolt pattern

4x100

2 generations were sold in 1995. Check your chassis code before ordering wheels.

Other years

1991 1992 1993 1994 1995 1996 1997 1998 All 1988–2002

Fitment tables

3 trims sold in 1995

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Sprinter Carib III

1995 – 2002 2 trims

Sprinter Carib 1.6i (AE114G)

114 hp · I4 185/65 R14 86S 1 fitment

GenerationIII 1995–2002

Power114 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R14 86S	14x5.5 ET45 ~~4x100~~	–	Tires Rims

Sprinter Carib 1.8i (AE115G)

118 hp · I4 185/65 R14 86S 1 fitment

GenerationIII 1995–2002

Power118 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R14 86S	14x5.5 ET45 ~~4x100~~	–	Tires Rims

Toyota Sprinter Carib II

1988 – 1995 1 trim

Sprinter Carib 1.6i (AE95G)

109 hp · I4 165x SR13 4 fitments

GenerationII 1988–1995

Power109 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x SR13	13x5 ET39 ~~4x100~~	–	Tires Rims
185/70 R13 86S	13x5.5 ET39 ~~4x100~~	–	Tires Rims
185/65 R14 86S	14x5.5 ET45 ~~4x100~~	–	Tires Rims
185/65 R13	13x5.5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.