1985 Toyota Sprinter Trueno tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1985 Toyota Sprinter Trueno.

1985 Toyota Sprinter Trueno tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1983 – 1987 2 trims

84 hp · 3A-U I4 155x SR13 2 fitments

GenerationIV (E80) 1983–1987

Power84 hp

Engine3A-U I4, Petrol

Center bore60.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x SR13	13x5 ET27 ~~4x114.3~~	–	Tires Rims
175/70 R13	13x5 ET27 ~~4x114.3~~	–	Tires Rims

129 hp · 4A-GEU I4 185/70 HR13 2 fitments

GenerationIV (E80) 1983–1987

Power129 hp

Engine4A-GEU I4, Petrol

Center bore60.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 HR13	13x5.5 ET27 ~~4x114.3~~	–	Tires Rims
185/60 R14 82H	14x5.5 ET27 ~~4x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.