2011 Toyota Succeed tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Toyota Succeed.

2011 Toyota Succeed tire sizes

165/80R13 175/65R14

Bolt pattern

4x100

Other years

2007 2008 2009 2010 2011 2012 2013 2014 All 2002–2020

Fitment tables

4 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Toyota Succeed XP50

2002 – 2014 Japan market 4 trims

Succeed 1.5 VVT-i (NCP51V)

107 hp · I4 165x R13 2 fitments

GenerationXP50 2002–2014

Power107 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x R13	13x5 ET39 ~~4x100~~	–	Tires Rims
165/80 R13	13x5 ET39 ~~4x100~~	–	Tires Rims

Succeed 1.5 VVT-i (NCP55V)

103 hp · I4 165x R13 2 fitments

GenerationXP50 2002–2014

Power103 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x R13	13x5 ET39 ~~4x100~~	–	Tires Rims
165/80 R13	13x5 ET39 ~~4x100~~	–	Tires Rims

Succeed 1.5 VVT-i (NCP58G)

107 hp · I4 165/80 R13 2 fitments

GenerationXP50 2002–2014

Power107 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/80 R13	13x5 ET39 ~~4x100~~	–	Tires Rims
175/65 R14	14x5.5 ET45 ~~4x100~~	–	Tires Rims

Succeed 1.5 VVT-i (NCP59G)

103 hp · I4 165/80 R13 2 fitments

GenerationXP50 2002–2014

Power103 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/80 R13	13x5 ET39 ~~4x100~~	–	Tires Rims
175/65 R14	14x5.5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.