Skip to content

1989 Toyota Supra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1989 Toyota Supra.

Fitment tables

5 trims sold in 1989

Open a trim for its factory package and every alternative size, front and rear.

Toyota Supra III (A70)

1986 – 1993 5 trims

Supra 2.0 GT (GA70)

148 hp · I6 205/60 R15 89H 1 fitment
GenerationIII (A70) 1986–1993
MarketJapan
Power148 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 89H15x6 ET50 5x114.3–TiresRims

Supra 2.0 Twin Turbo (GA70)

207 hp · I6 215/60 R15 90H 1 fitment
GenerationIII (A70) 1986–1993
MarketJapan
Power207 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R15 90H15x6.5 ET50 5x114.3–TiresRims

Supra 2.0i (GA70)

133 hp · I6 195/60 R15 86H 1 fitment
GenerationIII (A70) 1986–1993
MarketJapan
Power133 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R15 86H15x6 ET45 5x114.3–TiresRims

Supra 3.0 Turbo

230 hp · 7MGTE I6 225/50 R16 / 245/45 R16 3 fitments
GenerationIII (A70) 1986–1993
MarketUSA
Power230 hp
Engine7MGTE I6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/50 R1616x7 ET37 5x114.3–TiresRims
Rear245/45 R1616x9 ET37 5x114.3–TiresRims
Front235/45 R1717x9 ET37 5x114.3–TiresRims
Rear255/40 R1717x9.5 ET37 5x114.3–TiresRims
225/50 R1616x7 ET37 5x114.3–TiresRims

Supra 3.0 Turbo (MA70)

237 hp · I6 225/50 R16 92V 1 fitment
GenerationIII (A70) 1986–1993
MarketJapan
Power237 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R16 92V16x8 ET50 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.