Skip to content

1997 Toyota Supra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Toyota Supra.

1997 Toyota Supra tire sizes

Bolt pattern
Fitment tables

4 trims sold in 1997

Open a trim for its factory package and every alternative size, front and rear.

Toyota Supra IV (A80)

1993 – 2002 4 trims

Supra 3.0

220 hp · I6 225/50 R16 / 245/50 R16 2 fitments
GenerationIV (A80) 1993–2002
MarketUSA
Power220 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/50 R1616x7 ET37 5x114.3TiresRims
Rear245/50 R1616x9 ET37 5x114.3TiresRims
225/50 R1616x7 ET37 5x114.3TiresRims

Supra 3.0 (JZA80)

221 hp · I6 225/50 ZR16 / 245/50 ZR16 2 fitments
GenerationIV (A80) 1993–2002
MarketJapan
Power221 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/50 ZR1616x8 ET50 5x114.3TiresRims
Rear245/50 ZR1616x9 ET50 5x114.3TiresRims
225/50 R16 92V16x8 ET50 5x114.3TiresRims

Supra 3.0 Turbo

320 hp · I6 235/45 ZR17 / 255/40 ZR17 1 fitment
GenerationIV (A80) 1993–2002
MarketUSA
Power320 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front235/45 ZR1717x8 ET50 5x114.333TiresRims
Rear255/40 ZR1717x9.5 ET50 5x114.333TiresRims

Supra 3.0 Turbo (JZA80)

276 hp · I6 225/50 ZR16 2 fitments
GenerationIV (A80) 1993–2002
MarketJapan
Power276 hp
EngineI6, Petrol
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 ZR1616x9 ET50 5x114.3TiresRims
235/45 ZR1717x9.5 ET50 5x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.