1998 Toyota T100 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Toyota T100.

1998 Toyota T100 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1993 – 1998 2 trims

150 hp · I4 31x10.50 R15 4 fitments

GenerationT100 1993–1998

Power150 hp

EngineI4, Petrol

Center bore106.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
31x10.50 R15	15x6 ET30 ~~6x139.7~~	–	Tires Rims
235/75 SR15	15x6 ET30 ~~6x139.7~~	35	Tires Rims
215/75 SR15	15x7 ET8 ~~6x139.7~~	32	Tires Rims
265/70 R16 111S	16x7 ET15 ~~6x139.7~~	35	Tires Rims

190 hp · V6 31x10.50 R15 4 fitments

GenerationT100 1993–1998

Power190 hp

EngineV6, Petrol

Center bore106.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
31x10.50 R15	15x6 ET30 ~~6x139.7~~	32	Tires Rims
235/75 R15 105S	15x6 ET30 ~~6x139.7~~	32	Tires Rims
215/75 R15 100S	15x7 ET8 ~~6x139.7~~	2.6	Tires Rims
265/70 R16 111S	16x7 ET15 ~~6x139.7~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.