Skip to content

1995 Toyota Tacoma tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Toyota Tacoma.

1995 Toyota Tacoma tire sizes

Bolt patterns
5x114.3
I (N100)
6x139.7
I (N100)
Fitment tables

4 trims sold in 1995

Open a trim for its factory package and every alternative size, front and rear.

Toyota Tacoma I (N100)

1995 – 2004 USA market 4 trims

Tacoma 2.4 4x2

142 hp · 2.4L 2RZ-FE I4 195/75 SR14 3 fitments
GenerationI (N100) 1995–2004
Power142 hp
Engine2.4L 2RZ-FE I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 SR1414x5 ET34 5x114.332TiresRims
215/70 SR1414x6 ET38 5x114.332TiresRims
215/65 SR1515x6 ET35 5x114.332TiresRims

Tacoma 2.7 4x4

150 hp · 3RZ-FE I4 225/75 R15 102S 3 fitments
GenerationI (N100) 1995–2004
Power150 hp
Engine3RZ-FE I4, Petrol
Center bore106.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 R15 102S15x6 ET10 6x139.72.2TiresRims
31x10.50 R1515x7 ET15 6x139.72.2TiresRims
265/75 R1515x7 ET15 6x139.72.2TiresRims

Tacoma 3.4 4x2

190 hp · 3.4L 5VZ-FE V6 195/75 SR14 3 fitments
GenerationI (N100) 1995–2004
Power190 hp
Engine3.4L 5VZ-FE V6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/75 SR1414x5 ET34 5x114.332TiresRims
215/70 SR1414x6 ET38 5x114.332TiresRims
215/65 SR1515x6 ET35 5x114.332TiresRims

Tacoma 3.4 4x4

190 hp · 5VZ-FE V6 225/75 R15 102S 3 fitments
GenerationI (N100) 1995–2004
Power190 hp
Engine5VZ-FE V6, Petrol
Center bore106.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 R15 102S15x6 ET10 6x139.72.2TiresRims
31x10.50 R1515x7 ET15 6x139.72.2TiresRims
265/75 R1515x7 ET15 6x139.72.2TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.