2006 Toyota Tarago tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Toyota Tarago.

2006 Toyota Tarago tire sizes

215/55R17 205/65R16 205/60R16

Bolt pattern

5x114.3

2 generations were sold in 2006. Check your chassis code before ordering wheels.

Other years

2002 2003 2004 2005 2006 2007 2008 2009 All 2000–2019

Fitment tables

3 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Tarago XR50

2006 – 2009 2 trims

Tarago 2.4 VVT-i

168 hp · I4 205/65 R16 95H 2 fitments

GenerationXR50 2006–2009

Power168 hp

EngineI4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R16 95H	16x6.5 ET39 ~~5x114.3~~	–	Tires Rims
215/55 R17 94V	17x7 ET50 ~~5x114.3~~	–	Tires Rims

Tarago 3.5 VVT-i

271 hp · V6 205/65 R16 95H 2 fitments

GenerationXR50 2006–2009

Power271 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R16 95H	16x6.5 ET39 ~~5x114.3~~	–	Tires Rims
215/55 R17 94V	17x7 ET50 ~~5x114.3~~	–	Tires Rims

Toyota Tarago XR30 Facelift

2003 – 2006 1 trim

Tarago 2.4 VVT-i

154 hp · I4 205/60 R16 92H 2 fitments

GenerationXR30 Facelift 2003–2006

Power154 hp

EngineI4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16 92H	16x6.5 ET50 ~~5x114.3~~	–	Tires Rims
215/55 R17 93V	17x6.5 ET50 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.