1999 Toyota Tercel tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1999 Toyota Tercel.

1999 Toyota Tercel tire sizes

175/70R13 155/80R13

Bolt pattern

4x100

Other years

1992 1993 1994 1995 1996 1997 1998 1999 All 1990–1999

Fitment tables

4 trims sold in 1999

Open a trim for its factory package and every alternative size, front and rear.

Toyota Tercel V (L50)

1994 – 1999 4 trims

Tercel 1.3i (EL51)

84 hp · I4 155/80 R13 79S 2 fitments

GenerationV (L50) 1994–1999

Power84 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/80 R13 79S	13x4.5 ET39 ~~4x100~~	–	Tires Rims
155x SR13	13x4.5 ET39 ~~4x100~~	–	Tires Rims

Tercel 1.5DT (NL50)

66 hp · I4 155x SR13 3 fitments

GenerationV (L50) 1994–1999

Power66 hp

EngineI4, Diesel

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x SR13	13x4.5 ET39 ~~4x100~~	–	Tires Rims
155/80 R13 79S	13x4.5 ET39 ~~4x100~~	–	Tires Rims
175/70 R13 82S	13x5 ET39 ~~4x100~~	–	Tires Rims

Tercel 1.5i (EL53)

93 hp · I4 175/70 R13 82S 1 fitment

GenerationV (L50) 1994–1999

Power93 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82S	13x5 ET39 ~~4x100~~	–	Tires Rims

Tercel 1.5i (EL55)

90 hp · I4 175/70 R13 82S 1 fitment

GenerationV (L50) 1994–1999

Power90 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82S	13x5 ET39 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.