1996 Toyota Town Ace tire and wheel sizes, bolt pattern and tire pressure
Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Toyota Town Ace.
Fitment tables
10 trims sold in 1996
Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.
Toyota Town Ace II (R20/R30) Facelift
1992 – 1996 Japan market 6 trims
Town Ace 2.0 (YR21G)
95 hp · I4
175x SR14 2 fitments
GenerationII (R20/R30) Facelift 1992–1996
Power95 hp
EngineI4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
| Tire size | Rim size and bolt pattern | Pressure, psi | Prices |
|---|---|---|---|
| 175x SR14 | 14x5.5 ET27 | – | TiresRims |
| 195/70 R14 91S | 14x5.5 ET27 | – | TiresRims |
Town Ace 2.0 (YR30G)
95 hp · I4
205/70 R14 94S 1 fitment
GenerationII (R20/R30) Facelift 1992–1996
Power95 hp
EngineI4, Petrol
Center bore108 mm
PCD5x139.7
ThreadM12 x 1.5
| Tire size | Rim size and bolt pattern | Pressure, psi | Prices |
|---|---|---|---|
| 205/70 R14 94S | 14x5.5 ET35 | – | TiresRims |
Town Ace 2.0 DT (CR21G)
84 hp · I4
175x SR14 2 fitments
GenerationII (R20/R30) Facelift 1992–1996
Power84 hp
EngineI4, Diesel
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
| Tire size | Rim size and bolt pattern | Pressure, psi | Prices |
|---|---|---|---|
| 175x SR14 | 14x5.5 ET27 | – | TiresRims |
| 195/70 R14 90S | 14x5.5 ET27 | – | TiresRims |
Town Ace 2.0 DT (CR30G)
84 hp · I4
205/70 R14 93S 1 fitment
GenerationII (R20/R30) Facelift 1992–1996
Power84 hp
EngineI4, Diesel
Center bore108 mm
PCD5x139.7
ThreadM12 x 1.5
| Tire size | Rim size and bolt pattern | Pressure, psi | Prices |
|---|---|---|---|
| 205/70 R14 93S | 14x5.5 ET35 | – | TiresRims |
Town Ace 2.2 DT (CR22G)
90 hp · I4
195/70 R14 91S 1 fitment
GenerationII (R20/R30) Facelift 1992–1996
Power90 hp
EngineI4, Diesel
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
| Tire size | Rim size and bolt pattern | Pressure, psi | Prices |
|---|---|---|---|
| 195/70 R14 91S | 14x5.5 ET27 | – | TiresRims |
Town Ace 2.2 DT (CR31G)
90 hp · I4
205/70 R14 94S 1 fitment
GenerationII (R20/R30) Facelift 1992–1996
Power90 hp
EngineI4, Diesel
Center bore108 mm
PCD5x139.7
ThreadM12 x 1.5
| Tire size | Rim size and bolt pattern | Pressure, psi | Prices |
|---|---|---|---|
| 205/70 R14 94S | 14x5.5 ET35 | – | TiresRims |
No trims match these filters
Try a trim name or an engine size like 2.0L.
Reading the table
What these columns mean
- OE fitment
- The package fitted at the factory for that trim.
- Alternative
- A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
- Rim size
- Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
- Bolt pattern (PCD)
- Number of studs and the diameter of the circle they sit on. It must match exactly.
- Center bore
- Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
- Pressure
- Recommended cold inflation pressure for that axle, in psi.
- Staggered
- A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
- Thread size
- Lug bolt or nut thread — needed when buying aftermarket fasteners.
Considering a different size?
Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.
Recent articles
